Protektor 127 ‘C’ Stud Partition(s) – 50 mm Stud
Verified by manufacturer 2 days ago
K10 127 2 x 12.5 mm Wallboard
K10 127 2 x 12.5 mm Wallboard
Protektor 127 ‘C’ Stud Partition(s) – 50 mm Stud.
Application
- Suitable for use where fire and acoustic performance is required.
- Suitable for use in large commercial spaces.
Description
Protektor 127 ‘C’ Stud Partition(s) – 50 mm Stud.
Features and benefits:
- Sever duty rating to BS 5234.
- Sound insulation (Rw dB): up to 53 dB Rw.
- Available with or without acoustic partition roll.
General information
Color | Other |
Finish | Other |
Material | Plasterboard Metal |
Shape | Other |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | K10/30 Metal stud K10/125 Metal stud partition system |
Specification data - Gypsum board partition systems
System performance | |
Sound insulation, Rw (minimum) to BS EN ISO 10140-2 or BS EN ISO 140-3 | 42 Rw (dB). |
Fire resistance to BS EN 1364-1 and classification to BS EN 13501-2 | EI 60. |
Duty rating to BS 5234-2 | Severe duty (SD). |
Maximum height - cold state | 3800 mm. |
Thickness | 102 mm. |
Classification data | |
System manufacturer | Protektor Group UK Ltd. |
Framing | Protektor ECO or MAXI TEC 50 mm C Stud; Protektor ‘ECO’ 52 mm Deep ‘U’ Channel; Protektor ‘ECO’ 52 mm U Track. Guidance for specification option: Studs:
Head detail:
Base detail:
Track fixing:
|
Insulation | None. |
Fire separation | |
Fire-stopping | Manufacturer guidanceAs required for penetrations and for base, head and any abutments to masonry, concrete or steelwork. Insert requirements. |
Linings | Two layers 12.5 mm wallboard. |
Fasteners | Protektor Drywall Screw’s at 300 mm centres (reduced to 200 mm at external edges). |
Joint treatment | Manufacturer guidanceAll boards to be butt-jointed and either paper-taped or taped and jointed, or scrim taped and skimmed. Insert requirements. |
Finish | Manufacturer guidanceConsult manufacturer and insert requirements. Seamless finishes: using board manufactures finishing products as per their recommendations and Protektor UK products as clause 471 Protektor paper and corner tape or 680 Seamless finishings using Protektor corner, angle and stop bead. |
System accessories | Not required. Protektor ‘ECO’ 70 mm Bracing Strip x 0.6 mm. Guidance for specification option:
Pattress. Guidance for specification option: For plywood installation, Protektor service support plates can be used. These are suitable for either 12 mm, 15 mm or 18 mm. |
Height | Manufacturer guidanceBuild heights. Consult manufacturer and insert requirements.
|
Sealing (joints and penetrations) | Intumescent acoustic sealant. Guidance for specification option: Twin beads of sealant 6 mm to 8 mm in diameter to base and head track to perimeter junctions with walls, floors, and ceilings and around openings. Use expanding intumescent mastic for all fire rated partitions to head and floor channels below head track and board fillets as required. |
Deflection | Manufacturer guidanceFor up to 25 mm deflection, use board fillets to allow for a 5–10 mm overlap of vertical boarding against board fillets. Boards fillets should have 2 x 6 mm beads of mastic to the substrate, and 2 x beads of mastic to the head track. Please refer to manufacturer for anything above 25 mm. Insert requirements or omit. |
Standards | To BS EN 1264-1, BS 476, BS 5234-2, BS EN ISO 140-3, BS EN 1364 and BS 7634. Guidance for specification option:
|
Sustainability data
Material | Plasterboard Metal |