The GOAT – Liquid-Applied Reactive -Waterproof roofing membrane - Liquid Applied Waterproof Coating

Product Application – The Goat® Flexible Waterproof Coating

General

Apply in accordance with manufacturer’s written instructions to form a continuous, seamless and flexible waterproof membrane.

The coating becomes waterproof within approximately 60 seconds of application, providing immediate resistance to water exposure during installation.

Substrate Preparation

Substrates shall be:

• Structurally sound and stable
• Clean and free from dust, grease, laitance or loose material
• Free from standing water

Although the product may be applied to damp substrates, surfaces must not have active flowing water at the time of installation.

Defects, cracks or loose areas shall be repaired prior to application.

Application method:

• Ready to use – do not dilute
• Stir thoroughly prior to application
• Apply by roller or paint brush
• Work evenly to achieve full, uniform coverage
• Ensure complete encapsulation at junctions, penetrations and upstands

Apply sufficient material to form a continuous, pinhole-free membrane.

Detailing

Particular care shall be taken at:

• Internal and external corners.
• Roof upstands and parapets.
• Drain outlets.
• Service penetrations.
• Construction joints.

All detailing areas must be fully coated to maintain waterproof continuity.

Curing and performance

The membrane provides:

• Rapid waterproof protection (within 60 seconds).
• Seamless waterproofing.
• Crack-bridging flexibility.
• UV resistance.
• Resistance to positive and negative water pressure.

Allow full cure before subjecting to heavy traffic or overlay finishes where specified.