Supergrip Primer: Enhanced Adhesion for Plaster-Based Applications - Primer for Extra Adhesion for Plaster
Verified by manufacturer 2 months ago
Supergrip is a waterborne roller primer that creates the adhesive key for plaster and drywall adhesives to bond over Intelligent Membranes liquid coatings. Easy to apply and clean.
Application
Product Application – Supergrip
Suitable for:
- Adhesion of finish plaster onto Passive Purple® or Airtight White®
- Adhesion of plasterboards using dot-and-dab adhesive systems onto Passive Purple® or Airtight White®
Supergrip provides an enhanced bonding key between dried Intelligent Membranes coatings and plaster-based finishing systems.
Surface Preparation
- Ensure substrate is fully dry prior to application.
- Remove all dust, debris and surface contamination that may impair adhesion.
Application conditions:
- Do not dilute.
- Minimum application temperature: +5°C.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or onto overheated substrates.
Application method:
- Stir thoroughly using a paddle mixer prior to use.
- Apply by roller or suitable low-pressure spray equipment.
- Apply one uniform coat at approximately 100–150 g/m².
- Ensure full and even coverage across the surface.
Drying and overcoating:
- Allow Supergrip to dry fully before installing plasterboard or applying finish plaster.
- Drying time will vary depending on temperature, humidity and ventilation conditions.
Cleaning:
- Clean tools and equipment immediately after use with clean water.
- Remove cured material mechanically.
Description
Setting plaster or dot-and-dab adhesive to bond directly onto a liquid membrane is a challenge — Supergrip solves it. This waterborne primer rolls onto dried Intelligent Membranes polymer coatings and creates the adhesive key that plaster and drywall adhesive systems need for a lasting bond.
Applied by roller to walls and ceilings, Supergrip dries to a tacky, textured film that dramatically improves long-term adhesion between the membrane and the finish layer. Water-based, low odor, and easy to clean up with water.
Suitable for use over Airtight White, Passive Purple, Waterproof Blue, and other Intelligent Membranes liquid coatings. Coverage: approx. 1 lb per 11 sq ft (1 kg per 10 sq ft). Supplied in 22 lb (10 kg) tubs.
Use wherever plaster, drywall compound, or dot-and-dab adhesive is applied over a liquid membrane — interior walls and ceilings on airtight and vapor-control assemblies.
Pairs with: Airtight White, Passive Purple, Passive Purple Brush, Lime Prime.
Product page: https://www.intelligentmembranes.com/products/supergrip-primer-10kg
Primer solutions: https://www.intelligentmembranes.com/pages/primers
Coverage rates: https://www.intelligentmembranes.com/pages/intelligent-membranes-application-coverage-rates
Watch it applied: https://www.youtube.com/channel/UCRU48mtdL587TE668StHIeg
General information
Color | Red |
Finish | Other |
Material | Liquid Water-borne |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
USMS | 09 27 00 Plaster fabrications |
SKU Code | IM/00SG/10 |
Specification data - Plasterboard primers
Classification data | |
Materials | Primer. |
Composition | Water-based. |
Finish color | Red. |
Density | 1.3 kg/ L. |
pH | 9.0. |
Application temperature | +5°C to +35°C. |
Application method | Low pressure spray or roller. |
Shelf life | 12 months. Manufacturer guidanceIn un-opened packaging and if stored correctly. Protect against frost. |
Capacity | 10 kg. |
Coverage | 100–150 g/m². Manufacturer guidanceOne layer. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Europe |
Country of product manufacture | Europe |
Material | Liquid Water-borne |
Recyclability | Not recyclable due to its adhesion to other products |
Recycled contentAs defined in clause 7.8 of ISO 14021 | 0 % |
Literature
Literature type
Supergrip - Install Guide
Supergrip - Product Sheet
Supergrip - Safety Data Sheet